Kitchen Cabinet Cost in Toronto — 2026 Prices for Real Kitchens

Toronto is the most expensive city in Canada for a kitchen renovation. Not by a little. Labour rates here run 30–40% higher than Calgary, and good contractors book out 4–6 months ahead. None of that is news if you’ve tried to get even a rough quote recently.

What is hard to find: actual numbers. Not ‘it depends’ real ranges, by cabinet type, that reflect what GTA homeowners paid in the last 12 months. That’s what this page is.

These figures cover installed cost for a mid-sized kitchen roughly 20 to 25 linear feet. That means cabinets, hardware, delivery, and a professional crew. Not countertops, not appliances, not demo.

2026 Installed Cabinet Prices — Toronto

Labour in the GTA runs $70–$110/hr for cabinet installation. A full kitchen takes a 2-person crew about 2–3 days. That labour alone can be $3,500–$7,000 before a single cabinet goes up.

Cabinet Type Low Range High Range Key Notes
RTA (flat-pack, self-install) $3,800 $8,500 You assemble saves $2,000–$4,000 in labour
RTA (professionally installed) $5,500 $12,000 Growing option in Toronto condos
Stock $9,500 $18,500 Big-box brands, pre-built, standard sizes only
Semi-Custom $15,000 $30,000 Most popular choice in GTA renovations
Custom (millwork) $30,000 $70,000+ Toronto, Vaughan, and East York shops

Why Two Identical Kitchens Can Cost $12,000 Apart in Toronto

Same brand. Same door style. Same square footage. The gap is real, and here’s where it comes from:

Who installs it: A high volume contractor working 5 kitchens at once quotes differently than a small crew doing 2 a month. Neither is wrong but the price difference is significant.

Building type: Condo renovations in Toronto cost more. Elevator bookings, restricted work hours (usually 8am–5pm weekdays only), hallway protection fees, and mandatory damage deposits from building management can add $800–$2,500 to your job before the contractor even starts.

Delivery logistics: Getting cabinets to a 22nd-floor condo in Yorkville is not the same as dropping them in a driveway in Scarborough. Some suppliers charge freight premiums for urban high-rises.

Filler complexity: A kitchen with 4 corners, a pantry, a peninsula, and overhead soffits requires more custom filler pieces, trim, and fitting time than a straight galley layout. Labour cost follows the complexity.

What Toronto Homeowners Are Actually Choosing

Semi-custom is the dominant choice in the GTA particularly in neighbourhoods like Leslieville, Leaside, and the Beaches where homeowners are staying long-term and want a kitchen that holds up. The $15,000–$22,000 range is where most of the action is.

RTA is growing, especially in condos. Companies like Semihandmade and Kitch now sell upgraded door fronts for IKEA SEKTION boxes so you get a semi-custom look at closer to RTA pricing. It’s popular in King West, Liberty Village, and similar condo-heavy areas.

Custom millwork remains a relatively small part of the market, concentrated in detached homes in Rosedale, Forest Hill, and high-end new builds in Etobicoke and North York.

Getting a Fair Quote in Toronto

3 Practical Tips

Get four quotes, not two.

The gap between the first and fourth quote on the same Toronto kitchen job averages $4,000–$9,000. Most homeowners stop at two. Getting a third and fourth costs nothing except time.

Separate the line items.

Ask every contractor to quote materials and labour on separate lines. A bundled quote is almost impossible to compare. You need to know: how many labour hours, at what rate, and what markup they're putting on materials.

Look west for cabinet supply.

Several cabinet suppliers in Mississauga and Vaughan carry the same product lines as GTA showrooms at 15–25% less. Lower overhead, same product. Many deliver direct to site in Toronto.

Frequently Asked Questions

Not for a straight cabinet replacement in the same footprint. If you’re moving plumbing, gas, or a wall, that’s a different story you’ll need a City of Toronto building permit. When in doubt, call 311 and ask. It’s a 5-minute call that can save a significant headache.

For spring and summer starts, 4–6 months is common for reputable crews. January through March is the best window to book if you want more options and sometimes better pricing. Summer is when contractors have the most leverage.

For condos, honestly yes more often than people expect. IKEA SEKTION boxes are plywood construction, which is solid. The limitation is finish and size options. If you add upgraded door fronts from a third party, you can get a genuinely good-looking kitchen for $6,000–$11,000 installed, which is hard to beat at that price point in Toronto.

In Toronto, many contractors supply and install. But some suppliers (particularly in Mississauga and Vaughan) sell materials only and you hire your own installer. Splitting the two sometimes saves money but it also means you manage the coordination, and if something goes wrong (wrong size, damaged pieces), the back-and-forth takes longer.